Knowledge

How to distinguish between grinding wheel, cutting disc and polishing disc?

Oct 30, 2020 Leave a message

1. They have different functions


The grinding wheel is an abrasive tool for grinding.


The cutting disc is a thin slice of cut metal.


The polishing sheet is a thin slice that is ground and polished.


2. They are made differently


The grinding wheel is made by adding a bonding agent to the abrasive, and then pressing, drying and roasting.


The cutting disc is mainly made of glass fiber and resin as a reinforced bonding material, which has the characteristics of high tensile, impact and bending strength.


The grinding disc is to plant fine abrasive particles (alumina or silicon carbide) on the high-strength polyester film with the help of high-voltage electrostatic field force, so that all the sand particles are pointed out and the cutting is sharp, which can provide higher grinding efficiency and Bright and meticulous polishing effect, and then through the backing, cutting and processing.


Grinding wheel:

According to the abrasive, the grinding wheel can be divided into ordinary abrasive (corundum and silicon carbide, etc.) grinding wheels, natural abrasive super-hard abrasives and (diamond and cubic grinding wheels, boron nitride, etc.) grinding wheels;


According to the shape, the grinding wheel can be divided into flat grinding wheel, cup grinding wheel, cylindrical grinding wheel, bevel grinding wheel, dish grinding wheel, etc.;


According to the binder, the grinding wheel can be divided into metal grinding wheel, rubber grinding wheel, resin grinding wheel, ceramic grinding wheel and so on.


Cutting piece:


According to the material, the cutting blades are mainly divided into fiber resin cutting blades and diamond cutting blades.


Among them, the former uses resin as a bonding agent to combine glass fiber mesh with a variety of materials, which can realize the cutting of alloy steel, stainless steel and other hard materials. The performance is very significant, and the stability of the cutting accuracy can be guaranteed, which can greatly improve the cutting efficiency. Save production costs. Its cutting methods are dry and wet.


Diamond cutting discs are mainly used for cutting hard and brittle materials such as stone, new and old roads, precast slabs, concrete, and ceramics. It mainly includes two parts: the base body and the cutter head. The matrix is the main support part of the bonded cutter head, and the cutter head is the main tool for cutting. Because the cutter head contains diamond, as the hardest substance at present, diamond can effectively cut the processed object. The cutter head will be worn during use, but the matrix will not.


Polishing sheet:

The abrasive particles of the polishing pad are oriented and arranged, and the surface of the product is sharp to ensure the best grinding performance of the abrasive belt; the surface of the product is evenly distributed, combined with a special binder, to prevent deep lines and irregular lines, and good chip removal ability , Not easy to block.


The particle size numbers are 240#, 320#, 360#, 500#, 800#, 1200#, 1500#, etc.


Disc sand is a kind of polishing pad. Disc sand is a round sanding sheet processed with sandpaper, which can be divided into two types: duvet and double-sided tape. It is used to polish hardware parts, plastics, and auto parts. It can be used faster than ordinary sandpaper. The grain number is divided into 60# 80# 100# 120# 150# 180# 220# 240# 320# 400#. The sanding sheet is used for sanding faster than ordinary sandpaper.


Send Inquiry